Tel: 971 4 368 68 74 971 4 368 68 75 Email:joseph@midasinfratek.com

ADJUSTABLE FLOOR SUPPORTING PEDESTALS FOR WOODEN DECKING AND TILED FLOORING

SpiraPave® Paver & Bearer Support

Our Innovation Your Solution

SpiraPave® pedestals are engineered to provide a versatile and cost-effective solution to support raised pavers and timber decking in an eco-friendly way. It provides a cavity for services to be concealed, improves heat and sound insulation and facilitates rapid surface drainage whilst allowing waterproofig and services to remain accessible.

SpiraPave® pedestal is based on a unique ‘step’ design for supporting raised pavers and timber decking. It creates a cavity to conceal services, improves heat and sound insulation, facilitates rapid surface drainage and allows easy access to waterproofig and services. It also reduces efflrescence and algae growth and reduces paving installation costs.

 

About SpiraPave®

SpiraPave® is a height and slope-adjustable pedestal engineered to support pavers and decking to reduce material, construction and lifecycle costs.

Height range of SpiraPave® is 12mm to 74mm, in 1mm increments. Additonal height of 45mm is obtained with the use of a SP-45E extender.

SpiraPave® is used in areas such as balconies, swimming pool surrounds and courtyards.

Accessories include top/bottom slope-correctors, spacer tabs, height extender, base plate and bearer holders.

 

Advantages

  • Low minimum height of 12mm.
  • Precise 1mm height adjustment.
  • Top and/or bottom slope correctors.
  • Easy to install, cost effective and lightweight.
  • Made from 100% recycled materials.
  • Supports Green Building certifiation.

Construction Benefis


SpiraPave® providing support for pavers


SpiraPave® providing support for timber decking.

Low minimum height is ideal for installations where other height-adjustable pedestals are generally too high to be used.

Eliminates need for bedding sand or cement screed, reducing the load burden on building structures. It also reduces installation time and costs.

Joint sealants and/or grouting is rendered unnecessary and expansion and contraction of pavers do not result in unsightly cracks.

SpiraPave® may be used with VersiPave® or VersiJack® pedestals, as an accessory for additional height adjustments.

High Compressive Strength

SpiraPave® with Extenders up to 119mm has a compressive strength of ≥ 20kN.

Supports Green Building Certifiation.

SpiraPave® is manufactured from recycled materials which meet European Union RoHS requirements.

“Engineered to reduce material,construction and lifecycle costs.”

Distinctive Features

Minimum Height

12mm minimum height with 1mm stepped increments.



Extended Height

Additonal 45mm height possible with use of SP-45E extender.

Slope Corrector

Used at top or bottom of pedestal for slope compensation of up to 5%.


Stability

Desired height is secured with Steel Locking Pin.

Bearer Holder

Suitable for widths 35mm to 80mm to keep bearer fimly in place.


Variable Angle Spacer Tab

Variable Angle Spacer Tabs allow pedestals to support up to 8 pavers with different corner angles.

 

PROJECTS

 

 


VersiJack® Paver & Bearer Support

Our Innovation Your Solution

VersiJack® is a new generation pedestal engineered to provide a versatile and sustainable solution to support raised pavers and timber decking. It provides a cavity for services to be concealed, improves heat and sound insulation, facilitates rapid surface drainage whilst allowing waterproofig to remain accessible.

VersiJack® is a new generation pedestal engineered to provide a versatile and sustainable solution to support raised pavers and timber decking. It provides a cavity for services to be concealed, improves heat and sound insulation, facilitates rapid surface drainage whilst allowing waterproofig to remain accessible.

 

About VersiJack®

VersiJack® is a height and slope-adjustable pedestal engineered by Elmich used to support paver or decking to reduce material, construction and lifecycle costs.

It caters to a wide range of height requirements, from 37mm - 1016mm, using only three main components parts (Top, Extender and Base).

Accessories includes top and bottom slope-correctors, spacer tabs, height extenders and bearer holders.

High Compressive Strength

VersiJack® has high ultimate compressive strength for various height combinations.

Supports Green Building Certifiation

VersiPave® is manufactured from recycled materials which meets EU RoHS requirements.

 

Advantages

  • Easy to install and lightweight.
  • Progressive height increments.
  • Top and/or bottom slope correction.
  • Supports Green Building certifiation.
  • Made from recycled material.
  • Easily removed and reused.

Construction Benefis

VersiJack® provide stable support for installation of decking.


VersiJack® allows easy accessibility for servicing when required.

VersiJack® provides a quick to install alternative to on-site fabricated concrete or metal piers.

VersiJack® provides a quick to install alternative to on-site fabricated concrete or metal piers.

The large flt base and rounded edges does not penetrate and compromise waterproofig membranes. The design prevents water ponding and breeding of pests.

Unique VersiJack® Turning Tool connected to a power drill permits height adjustments with minimum effort.



Turning Tool greatly reduces the time needed for height adjustments.

Distinctive Features

Top Slope Corrector

Top Slope Corrector provides for slope compensation up to 5%, keeping pavers level on a sloping surface.


Bearer Holder

Bearer Holder accomodates bearer widths of 50mm to 85mm and keeps it fimly in place.

Bottom Slope Corrector

Bottom Slope Corrector by itself allows pedestal to remain fimly upright on incline of up to 5%.



Locking Ring

Locking Rings ensure pedestals are secured at desired heights and are easily removed when not required.

Spacer Tab

Spacer Tabs of various thicknesses from 2mm to 10mm cater for different gap sizes between pavers.



Variable Angle Spacer Tab

Variable Angle Spacer Tabs allow pedestals to support up to 8 pavers with different corner angles.

PROJECTS

 

 


VersiPave® Paver Support

Our Innovation Your Solution

VersiPave® pedestals are engineered to provide a versatile and cost-effective solution to support raised pavers in an eco-friendly way. It provides a surface cavity for services to be concealed, improves heat and sound insulation, facilitates rapid surface drainage whilst allowing waterproofig and services to remain accessible.

VersiPave® height adjustable paver support pedestal provides a cost effective solution for raised pavers with inconsistent or uneven thickness. It creates a cavity to conceal services, improves heat and sound insulation, facilitates rapid surface drainage and allows easy access to waterproofig. It also reduces efflrescence, algae growth and paving installation costs.

 

About VersiPave®

VersiPave® is a paver support pedestal engineered by Elmich to reduce material, construction and lifecycle costs.

Height range of VersiPave® is 24mm to 45mm and may be increased using VP-20E and/or VP-40E extenders.

The ability of VersiPave® to be separated into halves or quarters, enables flsh placement along wall edges and also around or into corners.

VersiPave® is used in areas such as balconies, swimming pool surrounds and courtyards.

 

Advantages

  • Minimum height of 24mm
  • Progressive 1mm height adjustment
  • Accommodates pavers of inconsistent thickness.
  • Supports Green Building certifiation.
  • Easy to install, cost effective and lightweight.
  • Made from 100% recycled materials.
  • Reduces construction time.
  • Reusable, suitable for temporary paving or retrofiting.

Construction Benefis


VersiPave® with Extenders provides height support up to 105mm.


VersiPave® separated into halves to enable flush placement along edges.

Height extensions and height adjustments are easy and convenient. Individually adjustable chocks allow for difference in paver thickness.

Elmiinates need for bedding sand or cement screed, reducing the load burden on building structures. It also reduces installation time and costs.

Joint sealants and grouts are unnecessary as expansion and contraction of pavers do not result in unsightly cracks.

High Compressive Strength

VersiPave® with Extenders up to 105mm have a compressive strength of ≥ 25 kN.

Supports Green Building Certifiation.

VersiPave® is manufactured from recycled materials which meets EU RoHS requirements.

“Engineered to reduce material,construction and lifecycle costs.”

 

Distinctive Features

Individual Chocks

Allow for difference in individual paver thickness.



Extended Height Range

Pedestal height can be increased with VP-20E and VP-40E extenders.


Height Adjustments

Allows height adjustments from 24mm to 45mm in 1mm increments.


Lock Pins

Security Pins prevent accidental movement of chocks after height is set.

Sectioned Design

VersiPave® and Extenders can be used in sections along edges and corners.


Versatility

Compatible with other Elmich pedestals e.g SpiraPave® and VersiJack®

 

PROJECTS